A-A-58024
at a minimum depth of 7 feet)
4.
Hydraulic reel carrier
5.
72 inch 6 Way Backfill blade
6.
Digging Chain, Type I - 50,000 pound Tensile Strength
Type II - 70,000 pound Tensile Strength
* A hydraulically movable attachment that allows trenching from centerline to
full offset to the right-hand side and intermediate points of the trencher.
The positioning of the digging unit can be accomplished from the operator's
seat. (Other attachments shall be provided when specified.]
Boom to dig 52 inches in depth, when Type I is required, or 70 inches in depth
when Type II is required, with capability of replacing the Boom tube only. Dual
auger shall be 15 inches in length out each side as a minimum. The trencher
shall be equipped with a mechanical trench cleaner and a 50,000 pound digging
chain for Type I trencher or a 70,000 chain for a Type II.
Unless otherwise specified a multi-position digging attachment, a backhoe and a
six way backfill blade shall be provided with each trencher.
J. Attachment drive. Modular attachments shall be driven by a hydrostatic
pump with infinitely variable speed control. There shall be three styles of
interchangeable gear boxes. The chain speeds for each gearbox shall be as
follows:
Low 0 to 500 fpm
Standard 0 to 600 fpm
High 0 to 900 fpm
K. Identification plate. An identification plate, permanently marked in
accordance with MIL-STD-130, shall be securely attached to the vehicle in a
readily accessible location. The identification plate shall contain the
following information:
NOMENCLATURE
MANUFACTURER'S MODEL NUMBER
MANUFACTURER'S SERIAL NUMBER
MANUFACTURER'S NAME
MANUFACTURER' S ADDRESS
MANUFACTURER' S SERVICE PHONE NUMBER
DATE OF MANUFACTURE
CONTRACT NUMBER
NATIONAL STOCK NUMBER
3
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business